Fix: Netgear AC750 Router Is Connected But No Internet
Getting a “Netgear AC750 router connected but no internet” problem? No need to worry! This post may help. Here, you will find the best troubleshooting tips that will surely help you fix it in a flash. So, without further ado, let’s get started, shall we?
Netgear AC750 Router Connected But No Internet?
Configure The AC750 Correctly
The first solution you should try to deal with the “Connected to Netgear AC750 router but no internet” issue is to make sure you have configured the device properly. Keep in mind, that if you haven’t done the Netgear AC750 set up properly, you definitely won’t be able to get the most out of your internet connection. Therefore, it is important for you to configure your Netgear router properly.
Check the cable connection.
Chances are that your Netgear AC750 router and modem are not connected properly and that is why you are not accessing the internet properly. To fix this, just make sure you connect the devices properly.
Your Netgear router and modem can be connected to:
Either using an Ethernet cable.
or using a wireless source
If you are using an Ethernet cable to connect the Netgear AC750 device and the modem, make sure it is not damaged or dusty.
And, if you’re using a wireless source, be sure to connect to your Wi-Fi network name.
Note: The distance between your Netgear router and modem should be no more than 40-50 feet and no less than 20 feet.
Change The Placement Of The Router
If you still have a “Netgear AC750 router connected but no internet” problem, then it’s time to change the location of your device. Your Netgear router might be set to a congested level and due to this, it is giving you internet connectivity issues. Therefore, the best place for your Netgear router is not inside a cabinet. Rather, it should be held at a higher level. It should not be placed in a corner but should be placed in the most central part of your home.
Power Cycle Your Router
Still no luck? no worries! Simply power cycle or restart your Netgear router.
To power cycle your router, here are the instructions to follow:
- Turn off your Netgear AC750 router.
- Wait for some time. Give your Netgear router some rest.
- Turn on your Netgear router and wait for a few minutes. Allow the Power LED on the device to flash green.
Now, here’s hoping the “AC750 router is connected but no internet” issue is resolved. Want to confirm? Access the router login page using 192.168.1.1 IP on your desktop or laptop. If the router login page loads quickly, consider yourself lucky as the problem has been successfully resolved. And, if the router login page takes ages to load or doesn’t load at all, it means that there is still an internet problem and you should try the next fix highlighted below to fix it. Need to try.
Contact Your Service Provider
Last, but not least! “Netgear AC750 router is connected but no internet” issue can also persist if you are not getting real internet range from your service provider. Therefore, it is recommended to contact your internet service provider. Ask him:
- Fix your slow internet problem by upgrading your internet plan.
- Update the device i.e. the modem provided by it (if required)
- Clear all your internet bills (if pending)
- Provide a modem that is compatible with the AC750 router (if not compatible). Yes, that’s right! Incompatibility between devices can also result in the “AC750 router is connected but not internet” issue.
Once everything is cleared by your service provider, try again to access the router login page using 192.168.1.1 IP and see if the slow internet issue is resolved. Is.
Did the fixes provided in this article help you fix the “Netgear AC750 router connected but no internet” issue?