Requirements Before Flashing (Itel it5026 SC6531E Flash File)
You will need the following pre-conditions before flashing the firmware with the flash file on Itel it5026 SC6531E.
- A computer with Internet
- Download and install SPD USB Mobile driver
- Itel it5026 SC6531E Flash File (Download from HERE).
- Infinity CM2 Flashing Software (Available HERE)
- File Password: techcenteral.com
How to Flash Calme Itel it5026 SC6531E Firmware
- Install the USB Mobile Drivers that you have downloaded above
- Extract the SC6531E Firmware Flash File on a specific location into your PC
- Open supported box setup / Dongle
- Complete the correct selection of Mobile CPU type
- Load the Flash file
- Switch off the Itel it5026 SC6531E. by long-pressing the red button and removing the battery
- Plugin the USB to the Charging port of Itel it5026 SC6531E. and another end with the PC and insert the battery again
- Press and hold the Mobile Boot Key (Menu button)
- Click on the Flash button on the flashing software screen and wait until the complete process
- Disconnect the mobile from the data cable and switch ON the phone
Platform Version: MOCOR_16A.Itel_W18.19.4_Debug
Project Version: it5026-G1811-EnUr-PK-20200819
MMI Version: it5026-G1811-EnUr-PK-20200819
BASE Version: BASE_SVN
HW Version: sc6531efm_bar
LOG Version: V1.0.1
Mobile brand:- ITEL
Model number:- IT5026
CPU type:- SPD6531E
Note: Always make a backup of your mobile before Flashing the File
The flashing process is tested only on Itel it5026 SC6531E. You will get positive results by following the steps and completing the requirements. We are not responsible for any damage or mishap that may occur depending upon the situation at your end.
Make a backup of all of your personal data such as pictures, videos, contacts, messages, and other important files.