Requirements Before Flashing (Itel IT5091 SC6531 Flash File)
You will need the following pre-conditions before flashing the firmware with the flash file on Itel IT5091 SC6531.
A computer with Internet
Download and install SPD USB Mobile driver
Itel IT5091 SC6531 Flash File (Download from HERE).
Infinity CM2 Flashing Software (Available HERE)
How to Flash Itel IT5091 SC6531 Firmware
Install the USB Mobile Drivers that you have downloaded above
Extract the Firmware Flash File on a specific location into your PC
Open supported box setup / Dongle
Complete the correct selection of Mobile CPU type
Load the Flash file
Switch off the Itel IT5091 by long-pressing the red button and removing the battery
Plugin the USB to the Charging port of Itel IT5091 and wait for mobile charging show then press and hold the Ok key + Back button boot key
Click on the Flash button on the flashing software screen and wait until the complete process
Disconnect the mobile from the data cable and switch ON the phone
Device Info Details :
Platform Version: MOCOR_16A.Itel_W18.19.4_Debug
G1809_it5091_32x32_320X240BAR_EnUr_PK_NEW
Project Version: it5091-G1809-EnUr-PK-20200320
MMI Version: it5091-G1809-EnUr-PK-20200320
BASE Version: BASE_SVN
HW Version: sc6531efm_bar
03-20-2020 12:58:36
LOG Version: V1.0.1
Saved to : C:\Users\Test\Desktop\MOCOR_16A.Itel_W18.19.4_Debug
G1809_it5091_32x32_320X240BAR_EnUr_PK_NEW.bin
Mobile brand:- ITEL
Model number:- IT5091
CPU type:- SC6531
Note: Always make a backup of your mobile before Flashing File