In this article, you’ll get the firmware flash file Jazz Digit 4g Elite. You can easily tackle the Jazz Digit 4g Elite firmware issues by following the simple step-by-step instructions.
Requirements Before Flashing (Jazz Digit 4g Flash File)
You will need the following pre-conditions before flashing the firmware with the flash file on Jazz Digitwith Internet
- Download and install MTK USB Mobile driver
- Jazz Digit 4g Elite Flash File (Download from HERE).
- Infinity CM2 Flashing Software (Available HERE)
How to Flash Jazz Digit 4g Elite Firmware
- Install the USB Mobile Drivers that you have downloaded above
- Extract the Jazz Digit 4g Elite Firmware Flash File on a specific location into your PC
- Open supported box setup / Dongle
- Complete the correct selection of Mobile CPU type
- Load the Flash file
- Switch off the Jazz Digit 4g by long-pressing the red button and removing the battery
- Plugin the USB to the Charging port of Jazz Digit and another end with the PC and insert the battery again
- Press and hold the Mobile (Menu )Boot key
- Click on the Flash button on the flashing software screen and wait until the complete process
- Disconnect the mobile from the data cable and switch ON the phone.
Jazz Digit flash file read info
Patch Level : MRA58K
Display ID : Digit_M42843DG_SW09_20201023_1839
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2015-10-01
Build Time : 23.10.2020
Product Model : Digit4G-Elite
Product Brand : Digit
Product Name : Digit4G-Elite
Product Device : Digit4G-Elite
Product Manfct : alps
Board Platform : mt6739
Product Info : Digit4G-Elite
Product Model : mt6731
The flashing process is tested only on Jazz Digit 4g Elite. You will get positive results by following the steps and completing the requirements. We are not responsible for any damage or mishap that may occur depending upon the situation at your end.
Make a backup of all of your personal data such as pictures, videos, contacts, messages, and other important files.