QMobile_i6_Metal_2017_MP_V8.0_13_07
Flash file Qmobile i6 Metal 2017. You can easily tackle the Qmobile i8i firmware issues by following the simple step-by-step instructions.
Requirements Before Flashing (Qmobile i6 Metal Flash File)
You will need the following pre-conditions before flashing the firmware with the flash file on Qmobile i6 Metal.
A computer with Internet
Download and install MTK USB Mobile driver
Qmobile i6 Metal Flash File (Download from HERE).
Infinity CM2 Flashing Software (Available HERE)
Password techcenteral.com
How to Flash Qmobile i6 Metal Firmware
Install the USB Mobile Drivers that you have downloaded above
Extract the Qmobile i6 Metal Firmware Flash File on a specific location into your PC
Open supported box setup / Dongle
Complete the correct selection of Mobile CPU type
Load the Flash file
Switch off the Qmobile i6 Metal by long-pressing the red button and remove the battery
Plugin the USB to the Charging port of Qmobile i6 Metal and another end with the PC and insert the battery again
Press and hold the Mobile (Vol- + Vol+ )Boot key
Click on the Flash button on the flashing software screen and wait until the complete process
Disconnect the mobile from the data cable and switch ON the phone
Disclaimer
The flashing process is tested only on Qmobile i6 Metal 2017. You will get positive results by following the steps and completing the requirements. We are not responsible for any damage or mishap that may occur depending upon the situation at your end.
Make backup all of your personal data such as pictures, videos, contacts, messages, and other important files.