Flash file Qmobile i8i. You can easily tackle the Qmobile i8i firmware issues by following the simple step-by-step instructions.
Requirements Before Flashing (Qmobile i8i Flash File)
You will need the following pre-conditions before flashing the firmware with the flash file on Qmobile i8i.
- A computer with Internet
- Download and install MTK USB Mobile driver
- Qmobile i8i Flash File (Download from HERE).
- Infinity CM2 Flashing Software (Available HERE)
- Password techcenteral.com
How to Flash Qmobile i8i Firmware
- Install the USB Mobile Drivers that you have downloaded above
- Extract the Qmobile i8i Firmware Flash File on a specific location into your PC
- Open supported box setup / Dongle
- Complete the correct selection of Mobile CPU type
- Load the Flash file
- Switch off the Qmobile i8i by long-pressing the red button and removing the battery
- Plugin the USB to the Charging port of Qmobile i8i and another end with the PC and insert the battery again
- Press and hold the Mobile (Vol- + Vol+ )Boot key
- Click on the Flash button on the flashing software screen and wait until the complete process
- Disconnect the mobile from the data cable and switch ON the phone
Loading : Y400BG_8.1_QMB_PK_BR1_29.pac
CRVersion : BP_R1.0.0
PacCPUinfo : y400
PacVersion : Y400BG_8.1_QMB_PK_BR1_29
FastCheck : 0x0061EA2BA7
The flashing process is tested only on Qmobile i8i. You will get positive results by following the steps and completing the requirements. We are not responsible for any damage or mishap that may occur depending upon the situation at your end.
Make backup all of your personal data such as pictures, videos, contacts, messages, and other important files.