FLYCOM61D_11C_M175_240A_QMOBILE_PCB01_gprs_MT6261_S00.M175_240A
In this article, you’ll get the firmware flash file Qmobile Khiladi V2. You can easily tackle the Qmobile Khiladi V2 firmware issues by following the simple step-by-step instructions.
Requirements Before Flashing (Qmobile Khiladi V2 Flash File)
You will need the following pre-conditions before flashing the firmware with the flash file on Qmobile Khiladi V2.
A computer with Internet
Download and install MTK USB Mobile driver
Qmobile Khiladi V2 Flash File (Download from HERE).
Infinity CM2 Flashing Software (Available HERE)
Password techcenteral.com
How to Flash Qmobile Khiladi V2 Firmware
Install the USB Mobile Drivers that you have downloaded above
Extract the Qmobile Khiladi V2 Firmware Flash File on a specific location into your PC
Open supported box setup / Dongle
Complete the correct selection of Mobile CPU type
Load the Flash file
Switch off the Qmobile Khiladi V2by long-pressing the red button and removing the battery
Plugin the USB to the Charging port of Qmobile Khiladi V2 and another end with the PC and insert the battery again
Press and hold the Mobile (Menu )Boot key
Click on the Flash button on the flashing software screen and wait until the complete process
Disconnect the mobile from the data cable and switch ON the phone
Info
File_Info : FLYCOM61D_11C_M175_240A_QMOBILE_PCB01_gprs_MT6261_S00.M175_240A.bin
FileVersion : M175_240A
Mobile brand:- Qmobile
Model number:- Khiladi V2
CPU type:- MT6261
Disclaimer
The flashing process is tested only on Qmobile Khiladi V2. You will get positive results by following the steps and completing the requirements. We are not responsible for any damage or mishap that may occur depending upon the situation at your end.
Make backup all of your personal data such as pictures, videos, contacts, messages, and other important files.
