Requirements Before Flashing (Qmobile Mini G6 RDA8851A Flash File)
You will need the following pre-conditions before flashing the firmware with the flash file on Qmobile Mini G6 RDA8851A.
- A computer with Internet
- Download and install RDA USB Mobile driver
- Qmobile Mini G6 RDA8851A Flash File (Download from HERE).
- Infinity CM2 Flashing Software (Available HERE)
How to Flash Qmobile Mini G6 RDA8851A Firmware
- Install the USB Mobile Drivers that you have downloaded above
- Extract the RDA8851A Firmware Flash File on a specific location into your PC
- Open supported box setup / Dongle
- Complete the correct selection of Mobile CPU type
- Load the Flash file
- Switch off the Qmobile Mini G6 by long-pressing the red button and removing the battery
- Plugin the USB to the Charging port of Qmobile Mini G6 and wait for the mobile charging show then press and hold the zero button boot key
- Click on the Flash button on the flashing software screen and wait until the complete process
- Disconnect the mobile from the data cable and switch ON the phone
Device Info Details :
[0] : RDA8851A
[1] : 8809
[2] : CT8851A
[3] : pasw_rda6625
[4] : flsh_spi32m
[5] : gc9106/st7735r/gc9102/NV3021/ili9163c
[6] : byd3A01/gc6123/gc6113/gc6133/BF3A02/sp0821/pas6175
[7] : rdabt_8809
[8] : rdafm_8809
[9] : 20190709Tue1309
[10] : Y399_QQVGA_QM_A36_EnPeUd_190709
Mobile brand:- Qmobile
Model number:- Mini G6
CPU type:- RDA8851A
Note: Always make a backup of your mobile before Flashing the File
