Monday, September 25, 2023
No menu items!
HomeTechnologyFirmwareSamsung SM-G950F U12 Repair And Auto Patch Firmware

Samsung SM-G950F U12 Repair And Auto Patch Firmware

Samsung Galaxy S8 SM-G950F UC OS9 Auto Patch {Reset No Lost Network} [Without any Tools Just Flash by Odin3] [G950FXXUCDUD1]


SM-G950F Auto Patch Firmware NG Network Repair File With Password Free Download

Flash With Odin3.

Samsung Galaxy S8 U12 Auto Patch, Fix NG, Hang Reboot Logo, Repair, Fixed Firmware.

  • First Put Mobile on the download mode and flash auto patch firmware with Odin.
  • then go to recovery and wipe user data & cache both.
  • install magisk apk.
  • repair or patch with any Samsung tool like z3x or chimera octopus box.

Patch certificate started
Gathering phone info…
We are collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G950F
Carrier ID: PHN
Timezone: Europe/Istanbul
Android Version: 9 [PPR1.180610.011] [SDK 28] Build Date: Fri Jan 29 23:25:29 KST 2021
PDA Version: G950FXXUCDUB1 [february 2021, rev1] Phone Version: G950FXXUCDUB1 [february 2021, rev1] Board Platform: EXYNOS5
Modem Platform: SHANNON355
Serial Number: RF8KC2H10WB
Imei: 35***********
Battery Status: 3.71V (47%)
Network Type: GSM
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2021-01-01
Em Did: 01362C7F6EDA
Checking root access.
The phone is rooted by: 23.0: MAGISKSU
Reading data…
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate…
Checking root access.
About 30 to180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON after a few seconds.
You can check the status of the IMEI using: *#0011#
The patch cert can be removed by repeating the process.
After installing new firmware, the patch cert process must be repeated.
Successfully finished.

Enable USB debugging and OEM

Go to setting > About > Tap On the (Build Number) 7 to 8 times consistently to enable (Developers Options)

See also  Odin3 3.14.1 Latest Version Donwload

Then go back and go to Developer Options and enable USB Debugging and OEM Unlock

Requirements Before Flashing SM-G950F U12 (Galaxy S8 Flash File)

You will need the following pre-conditions before flashing the firmware with the flash file on Galaxy S8.

A computer with Internet

Download and install Samsung USB Mobile driver

Galaxy S8 Flash File (Download from HERE).

Odin3 Setup (Download From Here)

Password Mohamad Al-Soliman

Odin3 3.14.1 select file


The flashing process is tested only on Samsung Galaxy S8. You will get positive results by following the steps and completing the requirements. We are not responsible for any damage or mishap that may occur depending upon the situation at your end.

Make backup all of your personal data such as pictures, videos, contacts, messages, and other important files.


Most Popular

Recent Comments