Saturday, December 2, 2023
No menu items!
HomeTechnologyFirmwareSamsung SM-N975f U7 Repair And Auto Patch Firmware

Samsung SM-N975f U7 Repair And Auto Patch Firmware

N975f Auto Patch This article will show you how to install Stock Firmware on Samsung Galaxy Note 10+ SM-N975F U7. In addition, we will show you how to repair your device. After you follow our instructions, your device will be working like new again!

How to install Stock Firmware on Samsung Galaxy Note 10+ SM-N975F U7

To install stock firmware on Samsung Galaxy Note 10+ SM N975F U7, you need to use a PC with USB debugging enabled and Samsung drivers installed. You will also need to make sure that your device is charged at least 40%. Make sure that KIES is not running in the background.

After you download the drivers and firmware from the official Samsung website, you can install them on your device. After a successful installation, your phone will reboot. Make sure that you do not disconnect the phone from your PC during the installation process. Wait for the process to finish. Once the firmware flashing process is completed, your phone will reboot automatically.

The Samsung SM-N975F firmware is compatible with all regions. If your phone has problems with software, you can use this stock firmware to solve them. It will also solve stuttering and lag.

The process of installing the firmware will take a while, so you should be patient. The Note 10 will reboot once the firmware update is complete. Once complete, you can use Smart Switch to restore your Note 10. You can check which firmware version is compatible with your phone by using the Smart Switch tool.

See also  Samsung SM-A226B U4 Repair And Auto Patch Auto Call Recorder Firmware

The first step in installing the new firmware is to install the Samsung USB Driver. You can download the driver from Samsung’s website. You can then connect your Samsung smartphone to your computer and enter the download mode. Once you have successfully completed the download process, your mobile will reboot itself automatically. If you have successfully installed the firmware, your mobile will display a Pass message on Odin.

How to repair Samsung SM-N975F

If your device has a BSOD or a boot loop problem, then you may want to try installing the SM-N975F stock firmware. This is the official software designed by the original equipment manufacturer (OEM). It is useful for a variety of software issues and can even help you restore your warranty. It can also be used to root the device if you want to.

You should also download the AutoPatch firmware from Samsung’s website. This software is designed to automatically update the ROM on Samsung Galaxy Note10+ devices. This firmware is not intended for novices and should only be used by experienced users. Make sure that your device has between seventy and eighty percent battery before you try to flash the firmware.

Once the download is complete, run Odin to install the firmware. This should take 30 to 50 seconds. When the process finishes, your phone should reboot. Odin should now display a message that says “Pass” and that the firmware has been successfully installed.

SM-N975F U7 XSG_N975FXXS7FUEB_AutoPatch {Reset No Lost Network} [Without any Tools Just Flash by Odin3]  NG Fix File

See also  Samsung SM-J250N Convert SM-J250FD Gapps Fix Rom


SM-N975f U7 Auto Patch Firmware NG Network Repair File Without Password Free Download

Flash With Odin3.

Samsung Galaxy Note 10+ U7 Auto Patch, Fix NG, Hang Logo, Repair, Fixed Firmware.

  • First Put Mobile on the download mode and flash auto patch firmware with Odin.
  • then go to recovery and wipe user data & cache both.
  • install magisk apk.
  • repair or patch with any Samsung tool like z3x or chimera octopus box.

Enable USB debugging and OEM

Go to setting > About > Tap On the (Build Number) 7 to 8 times consistently to enable (Developers Options)

Then go back and go to Developer Options and enable USB Debugging and OEM Unlock

Requirements Before Flashing (N975f U7 Auto Patch)

You will need the following pre-conditions before flashing the firmware with the flash file on Samsung Galaxy Note 10+ OS12.

  • A computer with Internet
  • Download and install the Samsung USB Mobile driver
  • Samsung Galaxy Note 10+ Flash File (Download from HERE).
  • Odin3 Setup (Download From Here)
  • No Any Password
Odin3 3.14.1 select file


The flashing process is tested only on Samsung Galaxy Note 10+. You will get positive results by following the steps and completing the requirements. We are not responsible for any damage or mishap that may occur depending upon the situation at your end.

Make a backup of all of your personal data such as pictures, videos, contacts, messages, and other important files.


Most Popular

Recent Comments