In this article, you’ll get the firmware flash file Vgotel I55. You can easily tackle the Vgotel I55 firmware issues by following the simple step-by-step instructions.
Requirements Before Flashing (Vgotel I55 Flash File)
You will need the following pre-conditions before flashing the firmware with the flash file on Vgotel I55.
A computer with Internet
Download and install MTK USB Mobile driver
Vgotel I55 Flash File (Download from HERE).
Infinity CM2 Flashing Software (Available HERE)
How to Flash Vgotel I55 Firmware
Install the USB Mobile Drivers that you have downloaded above
Extract the Vgotel I55 Firmware Flash File on a specific location into your PC
Open supported box setup / Dongle
Complete the correct selection of Mobile CPU type
Load the Flash file
Switch off the Vgotel I55 by long-pressing the red button and remove the battery
Plugin the USB to the Charging port of Qmobile Khiladi V2 and another end with the PC and insert the battery again
Press and hold the Mobile (Menu )Boot key
Click on the Flash button on the flashing software screen and wait until the complete process
Disconnect the mobile from the data cable and switch ON the phone
File_Info : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION
Mobile brand:- Vgotel
Model number:- i55
CPU type:- MT6261
The flashing process is tested only on Vgotel I55. You will get positive results by following the steps and completing the requirements. We are not responsible for any damage or mishap that may occur depending upon the situation at your end.
Make backup all of your personal data such as pictures, videos, contacts, messages, and other important files.